DC12V ES1612 2 Wires Switch Controlled Tubular Motor for Mini RV Roller Shade Blinds

The RV Day/Night Roller Shades have been designed specifically for the RV lifestyle, offering a solution to replace old and outdated RV window coverings. These shades come with a switched or remote-controlled DC12V Tubular motor, made with the needs of the RV owner in mind.

If you're unsure of the size you should purchase, you can convert the existing blinds in your motor home to electric roller shades. The shade tube is 1", which is the outside diameter of the blind. The motor housing has a diameter of 16mm.

These motors operate on 12-volts DC, and a simple DPDT switch controls their direction. Applying positive and negative power makes the motor go in one direction, while negative and positive power makes it go in the other direction. The control type is non-radio, and you can use any receiver controller or hard-wired switches.

The lift capacity of these motors is 4.4lb (2 Kg) with a 1" O.D. tube. They run on a safe 12V DC voltage, suitable for both children and adults, with a noise level of 36dB. The operating temperature range is 32°F to 140°F (0°C to 60°C), and the supply cable length is 2 meters.

These motors are compatible with 1-inch/25mm OD shade tubes. They have two wires, one for the positive terminal and one for the negative terminal. Low-voltage motors require a power supply to convert 110-volt AC to 12V DC. The motor speed will vary depending on the shade size (weight), wire gauge, and wire length.

We offer several options for DC 12V Switch Control, compatible with different shade tube sizes: 1-3/16", 1", 1-1/8", and 1.5". Each option has its own product details, such as the shade tube size, motor diameter, included rubber fittings, and control type.

These 12-volt shade motors are the non-remote version, which means they use hard-wired switches for controls. They are designed for small roller blinds with a 1" (25mm) OD shade tube and a maximum weight of 4.4 lbs.

The easy-to-use switch or controller allows you to run the shades up and down, with two electrical wires for positive and negative. These hard-wired window shades offer DC motors that do not require charging or recharging batteries, making them a convenient solution for blackout shades within the 4.4 lbs motor limit.

Additionally, these motors can be integrated with home automation solutions via smart devices when used with a network hub, such as RF control, hard-wired switches, or the Qubino Shutter DC module as a Z-wave receiver with ES motors. This enables control through various platforms, including Fibaro Home Center, Vera Edge, Zipato Zipabox, and more.

product information: